Lab Equipment Surplus to Baker Hughes Alameda - Everything Must Go

Starts: 11 May 2026 at 08:00 BST
Ends: 28 May 2026 at 22:00 BST
Featuring: Buchi Corporation Rotavapor R-250 system , New MPE Grinder-Milling Unit, Ace Glass, Inc. 150 L Reactor Kit with 2022 Vestil Model VWS-770AA lift, Huber Unistat 615 Air-Cooled Circulator, CALEVA MTR3 Mixer Torque Rheometer 3 System, (2) LCI Multiple-Granulators, and much more! Any Bidder MUST and CAN ONLY USE Baker Hughes approved Contractor. Please see the sale information section for information for details. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 44 of 44 lots
  • 4 Stock.jpg
     site
    LOT 1

    Met-Chem 19 cu. Ft., 800mm Filter Press w/ 38 Plates

    Met-Chem 19 cu. Ft., 800mm Filter Press w/ 38 Plates: In storage @ ChemDesign, 2 Stanton St, Marinette, WI 54143, Catalog Photo, Capacity: 19 cubic feet (7.24 sq ft); Plate Configuration: 38 non-gasketed 800mm plates.; Cake Thickness: 2 inches; Closure System: Automatic hydraulic closure; Configuration: Corner feed with 3 corner return.
  • 10-1.jpg
    10-2.jpg
     site
    LOT 2

    Buchi Corp. Rotavapor R-250 system

    Buchi Corp. Rotavapor R-250 system - In storage - Stock Photo, Located at Expediters Int'l, 1075 Montague Expy, Milpitas, CA 95035; Includes: Rotary evap.; Buchi Corp. Recirculating Chiller, Evap. flask 50L D150; Recirculating Chiller 6kW 400V 60Hz; 202307-010; No photos
  • 11-1.jpg
    11-2.jpg
    11-3.jpg
    11-4.jpg
    11-5.jpg
    11-6.jpg
     site
    LOT 3

    LCI Multiple-Granulator MG-55 (1 of 2)

    LCI Multi Granulator (MG-55) is a laboratory-scale extrusion and granulation system; Three extrusion modes in one unit: Dome extrusion, Radial extrusion, Axial extrusion, Quick changeover between extrusion types for rapid formulation trials. Compact benchtop design suitable for R&D labs. Low-pressure extrusion to preserve sensitive materials. Wet granulation for tablet production. Pellet formation for controlled-release drug delivery. Food product shaping (e.g., nutraceuticals). Specialty chemical pelletizing. With Metal Cart and Tektronix Controller. SN #6905737
  • 22-1.jpg
    22-2.jpg
    22-3.jpg
    22-4.jpg
     site
    LOT 4

    Hot Shot Heat Treating Oven; up to 1000°C; Includes Filtra Vibration Sieves

    Hot Shot Heat Treating Oven; up to 1000°C; Includes Filtra Vibration Sieves
  • 27-1.jpg
    27-2.jpg
     site
    LOT 5

    Superior Air Downdraft Spray & Fume Filtration Table - Material Handling station

    Superior Air Downdraft Spray & Fume Filtration Table - Material Handling station; Purchased 05/2024; SN #2161
  • 28-1.jpg
    28-2.jpg
    28-3.jpg
    28-4.jpg
    28-5.jpg
     site
    LOT 6

    DAMN Falcon IX Portable Dust Collector (1 of 2)

    Plug and play portable dust extractor, requires power source and air line; Smooth 360º fume extraction arm for flexible positioning; 885 CFM; Low-profile cabinet provides low center of gravity for safety and easy capture arm positioning; Built in spark trap; Durable locking swivel casters; Built in thermal protection for the motor; Waste Drawer #1 (Before the metal mesh prefilter, collects the larger dust particles) – 2.6-Gal Capacity; Waste Drawer #2 (Under the cartridge filter, collects the smaller dust particles) – 3.9-Gal Capacity; Total Capacity is 6.5 Gal; Falcon IX Has (2) Dust Drawers: Dust Drawer #1 (Before the metal mesh prefilter, collects the larger dust particles) – 2.6-Gal Capacity: Dust Drawer #2 (Under the cartridge filter, collects the smaller dust particles) – 3.9-Gal Capacity; Total Capacity = 6.5 Gal; Purchased 05/2024
  • 29-1.jpg
    29-2.jpg
    29-3.jpg
    29-4.jpg
    29-5.jpg
    29-6.jpg
     site
    LOT 7

    MPE (Modern Processing Equipment) Grinder-Milling Unit - New In Crate

    MPE (Modern Processing Equipment) Grinder-Milling Unit - New In Crate - Purchased 10/2025
  • 30-1.jpg
    30-2.jpg
    30-3.jpg
    30-4.jpg
    30-5.jpg
     site
    LOT 8

    Jeio Tech Lab Companion Vacuum Oven Model OV4-30

    120 V AC; 60Hz; 10.2 A, 1 cu.ft.; Max Temp 250 C; Purchased 01/2022; SN # 1D037522
  • Apex_Auctions_Logo-jpg.jpg
     site
    LOT 9

    Across International 20L Rotary Evaporator w/ Cole Parmer Polystat Chiller;

    Purchased 07/2022; In Storage - No pictures220V 50/60Hz single phase, 20A, 4300 watt (rotation motor: 300 watts); Purchased 07/2022; In Storage - No pictures
  • 33-1.jpg
    33-2.jpg
    33-3.jpg
    33-4.jpg
    33-5.jpg
    33-6.jpg
    33-7.jpg
    33-8.jpg
    33-9.jpg
    33-10.jpg
     site
    LOT 10

    Ace Glass, Inc. 150 L Reactor Kit with 2022 Vestil Model VWS-770AA lift and Step Stool

    Ace Glass, Inc. 150 L Reactor Kit with 2022 Vestil Model VWS-770AA lift and Step Stool; Purchased 09/2022. Used in conjunction with Huber 615 Unistat Circulator (See #36)
  • 34-1.JPG
     site
    LOT 11

    MudHen MH1 Filter Press, In Storage, Stock Photo; 1 cu ft

    Capacity: 360 gal/Hr 55 x 31 x 48; Purchased 04/2022
  • 35-1.jpg
    35-2.jpg
    35-3.jpg
    35-4.PNG
     site
    LOT 12

    MudHen MH4 Filter Press; 3.5 cu ft; Purchased 06/2022; SN #SPF2281051

    Concrete Slurry Processing Capacity: 1250 gal/Hr; 96 x 31 x 48; 800 lbs.; Purchased 06/2022; SN #SPF2281051. First cost does not seem to be accurate as Mudhens are not near that price
  • 36-1.jpg
    36-2.jpg
    36-3.jpg
    36-4.jpg
    36-5.jpg
    36-6.jpg
    36-7.jpg
     site
    LOT 13

    Huber Unistat 615 Air-Cooled Circulator

    Temperature controller used in conjunction with Ace Glass 150L Reactor Kit - Lot 33; Purchased 08/2022; SN #S407605
  • 37-1.jpg
    37-2.jpg
    37-3.jpg
     site
    LOT 14

    2022 Mettler Toledo Floor Scale Model PUA597 US11

    2022 Mettler Toledo Floor Scale Model PUA597 US11, SN # C232577962
  • 38-1.jpg
    38 Stock 1.jpg
    38 Stock 2.jpg
    38 Stock 3.jpg
     site
    LOT 15

    Julabo CORIO CP-300F Refrigerated Circulator, 115V/60Hz (NRTL Certified)

    Julabo CORIO CP-300F Refrigerated Circulator, 115V/60Hz (NRTL Certified) -
  • 41-1.jpg
    41-2.jpg
    41-3.jpg
    41-4.jpg
    41-5.jpg
     site
    LOT 16

    CALEVA MTR3 Mixer Torque Rheometer 3 System: mini extruder; Multilab Base unit extender; Purchased 11/2022

    CALEVA MTR3 Mixer Torque Rheometer 3 System: mini extruder; Multilab Base unit extender; Purchased 11/2022, MTR SN #604231; Extender SN #806133
  • 43-1.jpg
    43-2.jpg
    43-3.jpg
    43-4.jpg
    43-5.jpg
    43-6.jpg
    43-7.jpg
     site
    LOT 17

    BP-211 3200W CW Research Microwave & CW-5000 Industrial Chiller

    MW generator and chiller with Rubbermaid cart; Purchased 12/2023
  • Apex_Auctions_Logo-jpg.jpg
     site
    LOT 18

    30 Gallon Jacketed Heavy Duty Mixing Tank, Purchased 06/2023, In Storage, at Expediters Int'l, 1075 Montague Expy, Milpitas

    30 Gallon Jacketed Heavy Duty Mixing Tank, Purchased 06/2023, In Storage, at Expediters Int'l, 1075 Montague Expy, Milpitas, CA 95035, no pictures available
  • 48-1.jpg
    48-2.jpg
    48-3.jpg
    48-4.jpg
    48-5.jpg
    48-6.jpg
    48-7.jpg
     site
    LOT 19

    Tiger-Vac Industrial Vacuum Systems for Combustible Dust

    Tiger-Vac Industrial Vacuum Systems for Combustible Dust (HAZLOC Division 2); Purchased 12/2023
  • 49-1.jpg
    49-2.jpg
    49-3.jpg
    49-4.jpg
    49-5.jpg
    49-6.jpg
     site
    LOT 20

    ChemGlass 50 L Process Reactor

    Motor Mount Arm Can Unlock and Swing Out Giving Greater Access to Reactor; Digital Temperature Monitor; Electric and XP Motor Has Separate Controller with Digital Display; Smaller Footprint Support Frame with Oversized Rugged S.S. Uprights and Heavy-Duty PTFE Coated Aluminum Fittings; Reactor Jacket Graduation Scale on Both Sides; 7-Neck Lid with Large Powder Addition Port; Heavy Duty Lockable Casters
  • 53-1.jpg
     site
    LOT 21

    (5) Eagle Flammable Liquid Storage Cabinet - Large

    (5) Eagle Flammable Liquid Storage Cabinet - Large
  • 55-1.jpg
    55-2.jpg
    55-3.jpg
    55-4.jpg
    55-5.jpg
    55-6.jpg
    55-7.jpg
    55-8.jpg
    55-9.jpg
     site
    LOT 22

    2008 GMX-Lab 10 Laboratory High Shear Granulation/Mixing System

    For Wet Granulation and Mixing Processes; Includes auxiliary parts such as bowl, stands, and trays in on-board storage cabinet; SN # GMX-167 46263
  • 61-1.jpg
    61-2.jpg
     site
    LOT 23

    Thermo Scientific RVT450 Refrigerated Vapor Trap

    115 V AC; 60 Hz @ 8 amps; 230 V AC; 50 Hz; 6 amps
  • 63-1.jpg
    63-2.jpg
    63-3.jpg
    63-4.jpg
     site
    LOT 24

    Southwest Science Refrigerated Low Speed Swing Bucket Centrifuge Model SCL651

    Temperature setting down to -10C; Cools to 4˚C in 5 min. typical in a 2o˚C room; Swing bucket rotor has inserts available for 2ml to 100ml tubes; Max speed 6,800 rpm; Max RCF 5583 xg; Swing bucket rotor max speed 5,000 rpm / 3,857 xg; 9 acceleration and 9 deceleration settings; Timer: 10 sec to 99 min or continuous; Quick Spin button; Quiet operation >58DB(A); 14.2″ w x 24.8″ d x 12.3″ h; Weight: 88 lbs; Power 115VAC, 5A, 60Hz; Top German Brand compressor: SECOP; SN# 15050021111115
  • 65-1.jpg
    65-2.jpg
    65-3.jpg
    65-4.jpg
     site
    LOT 25

    LCI Multiple-Granulator MG55

    LCI Multi Granulator (MG-55) is a laboratory-scale extrusion and granulation system; Three extrusion modes in one unit: Dome extrusion, Radial extrusion, Axial extrusion, Quick changeover between extrusion types for rapid formulation trials. Compact benchtop design suitable for R&D labs. Low-pressure extrusion to preserve sensitive materials. Wet granulation for tablet production. Pellet formation for controlled-release drug delivery. Food product shaping (e.g., nutraceuticals). Specialty chemical pelletizing. With Metal Cart and Tektronix Controller.
  • 66-1.jpg
    66-2.jpg
    66-3.jpg
    66-4.jpg
     site
    LOT 26

    2023 Subzero Scientific Stainless Steel 20L Cold Vapor Trap

    2023 Subzero Scientific Stainless Steel 20L Cold Vapor Trap; SN# SZ-CT2 (2 of 2)
  • 68-1.jpg
    68-2.jpg
    68-3.jpg
    68-4.jpg
    68-5.jpg
    68-6.jpg
     site
    LOT 27

    2020 W.S. Tyler RO-TAP® RX-29 Mechanical Sieve Shaker w/ (3) Sieves

    Particle Size Range = 4″ to US #635 mesh (20 um); 8-inch diameter test sieves; Test Sieve Capacity = Up to 6 full-height sieves or Up to 13 half-height sieves; 9-minute digital timer/clock with a tolerance of .1 seconds; Oscillations Per Minute = 278 +/- 10; Taps Per Minute = 150 +/- 10; Voltage = 115v or 230v at 50 or 60 Hz; SN #15985
  • 69-1.jpg
    69-2.jpg
    69-3.jpg
    69-4.jpg
     site
    LOT 28

    Copley Tapped Density Tester JV 2000

    Equipped with two test stations for reliable measurements; Measures tapped density by mechanically tapping a measuring cylinder containing the sample; 280 x 250 x 670 mm (w x d x h); Useful for powder flowability studies and optimizing pack sizes; SN #46364
  • 72-1.jpg
    72-2.jpg
    72-3.jpg
    72-4.jpg
    72-5.jpg
    72-6.jpg
     site
    LOT 29

    DAMN Falcon IX Portable Dust Collector

    Purchased 05/2024 (2 of 2) Plug and play portable dust extractor, requires power source and air line; Smooth 360º fume extraction arm for flexible positioning; 885 CFM; Low-profile cabinet provides low center of gravity for safety and easy capture arm positioning; Built in spark trap; Durable locking swivel casters; Built in thermal protection for the motor; Waste Drawer #1 (Before the metal mesh prefilter, collects the larger dust particles) – 2.6-Gal Capacity; Waste Drawer #2 (Under the cartridge filter, collects the smaller dust particles) – 3.9-Gal Capacity; Total Capacity is 6.5 Gal; Falcon IX Has (2) Dust Drawers: Dust Drawer #1 (Before the metal mesh prefilter, collects the larger dust particles) – 2.6-Gal Capacity: Dust Drawer #2 (Under the cartridge filter, collects the smaller dust particles) – 3.9-Gal Capacity; Total Capacity = 6.5 Gal; Purchased 05/2024
  • 79-1.jpg
    79-2.jpg
    79-3.jpg
    79-4.jpg
     site
    LOT 30

    GAST Diaphragm Pump Model DOA-P704-AA

    GAST Diaphragm Pump Model DOA-P704-AA (3 of 4); 60 MAX PSI; 1/8 HP; 115V; 1.1 CFM; 5.12" WIDE X 7.62" LONG X 7.59" HIGH
  • 80-1.jpg
    80-2.jpg
    80-3.jpg
    80-4.jpg
     site
    LOT 31

    GAST Diaphragm Pump Model DOA-P704-AA

    GAST Diaphragm Pump Model DOA-P704-AA (4 of 4); 60 MAX PSI; 1/8 HP; 115V; 1.1 CFM; 5.12" WIDE X 7.62" LONG X 7.59" HIGH
  • 81-1.jpg
    81-2.jpg
    81-3.jpg
    81-4.jpg
    81-5.jpg
     site
    LOT 32

    Lot of PLA Basic and PET-CF print media for Bambu Printer

    Lot of PLA Basic and PET-CF print media for Bambu Printer: (10) New boxes, one un-opened roll in plastic and (5) partial rolls of assorted colors of PLA Basic
  • 87-1.jpg
    87-2.jpg
     site
    LOT 33

    (2) New Hastings 165-gal Polyethylene Vertical Storage Tanks

    (2) New Hastings 165-gal Polyethylene Vertical Storage Tanks: 6" fill Size; 1.5" Outlet Size; 50 lbs each
  • 99-1.jpg
    99-2.jpg
    99-3.jpg
    99-4.jpg
    99-5.jpg
    99-6.jpg
     site
    LOT 34

    (2) Buckets StonyLab glasware 24/40: 11 with contents, plus new box of 5.

    (2) Buckets StonyLab glasware 24/40: 11 with contents, plus new box of 5.
  • 101-1.jpg
    101-2.jpg
    101-3.jpg
     site
    LOT 35

    ToAuto 3 in 1 Soldering Station FT-80W

    ToAuto 3 in 1 Soldering Station FT-80W
  • 106-1.jpg
    106-2.jpg
    106-3.jpg
    106-4.jpg
    106-5.jpg
    106-6.jpg
    106-7.jpg
    106-8.jpg
    106-9.jpg
     site
    LOT 36

    Box of Misc. PVC Connections, Metal Valves, etc

    Box of Misc. PVC Connections, Metal Valves, etc
  • 107-1.jpg
    107-2.jpg
     site
    LOT 37

    Heating Tubes, Elements, etc.

    Heating Tubes, Elements, etc. as pictured
  • 109-1.jpg
    109-2.jpg
    109-3.jpg
    109-4.jpg
     site
    LOT 38

    Lot of Assorted Pipe & Elbows - 6"

    Lot of Assorted Pipe & Elbows6" PVC: (4) Westlake PVC1 Sch 40 D2466 Elbows; (4) Lasco PVC1 Tees; (3) Sch 80 Corzano Pipe 24" Long.
  • 115-1.jpg
    115-2.jpg
    115-3.jpg
     site
    LOT 39

    Eco-Worthy Water Pressure Pump Model DPHC-F42-110V

    Eco-Worthy Water Pressure Pump Model DPHC-F42-110V
  • 120-1.jpg
    120-2.jpg
    120-3.jpg
    120-4.jpg
    120-5.jpg
    120-6.jpg
    120-7.jpg
    120-8.jpg
     site
    LOT 40

    Prototype Equipment and Rolling Board

    Prototype Equipment and Rolling Board: Includes 3-gal/30-lb Rust-Resistant, powder-coated steel Manchester 200 PSI Air Receiver Tank #305098
  • 130-1.jpg
    130-2.jpg
    130-3.jpg
    130-4.jpg
    130-5.jpg
     site
    LOT 41

    2025 HeatMax Food Warmer Model 191929

    2025 HeatMax Food Warmer Model 191929: 0 to 220 F; 4 shelves, SN #0084164
  • 0_1_b0da90a1-5324-47ee-b984-7089730394c9.jpg
    138-1.jpg
    138-3.jpg
    138-4.jpg
    138-5.jpg
    138-6.jpg
    138-7.jpg
    138-15.jpg
    138-16.jpg
     site
    LOT 42

    INFICON Whisper Ultrasonic Leak Detector, Luxor AV Cart, & Impulse Sealer

    INFICON Whisper Ultrasonic Leak Detector, Luxor AV Cart, & Impulse Sealer
  • 71-1.jpg
    71-2.jpg
    71-3.jpg
    71-4.jpg
     site
    LOT 43

    JHT Workshop Crane Model MKS 500 DW-S

    Max. load capacity 500 kg (approx. 1100 lbs.); Double action hydraulic pump for faster lifting; Big range by 4 times adjustable loading arm; Foldable crane for space-saving; Large roller bearing wheels for easy movement with feet protection; Hook 360° turn-able; Durable hydraulic / rate of drop finely adjustable; SN #880
  • 185-1.jpg
    185-2.jpg
    185-3.jpeg
    185-4.jpeg
    185-5.jpeg
    185-6.jpeg
     site
    LOT 44

    2022 Anton Paar Monowave 200 Microwave Synthesis Reactor

    2022 Anton Paar Monowave 200 Microwave Synthesis Reactor: Max Operating Pressure = 290 psi, Max. IR & Fiber-optic Temps = 260 C, Max power = 850 W, ~230V, 50/60 Hz, SN# 84069955

Essential Information

General Information

Auction Dates
Starts: 11 May 2026 at 08:00 BST
Ends: 28 May 2026 at 22:00 BST
Site Address
950 Marina Village Parkway, Ste 101
Alameda
CA
94501
United States
Viewing Days
By Appointment Only
Call Us to Schedule an Appointment Inspection

Fees & Payment

Currency
USD
Buyers Premium
18% or as specified on individual items
Payment

General payment information

  • Payment is due immediately upon receipt of invoice.
  • All payments must be made in the currency stated on the invoice.
  • Accepted forms of payment are Wire Transfer only.
  • Please reference invoice number on wire transfer. 
  • Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.

Goods

Clearance days
08 June 2026 at 16:00 BST - 13 June 2026 at 00:00 BST
By Appointment Only
General Collection Information

Collection

Any Bidder MUST and CAN ONLY USE Baker Hughes approved Contractor. 

Company Name: DFWMovers

Contact: Brian Panizzi

Phone:  281-743-3655

Email:   brianp@dfwmovers.com

 

Company Name: Liberty Plant Maintenance

Contact: Scott Krzyzanowski

Phone:  281-415-6720

Email:   riggerlpm@yahoo.com

 

Company Name: Able Machinery Movers

Contact: Darren Boles

Phone:  713-539-0644

Email:   dboles@ablemm.com

Contact: Jimmy Murrah

Phone:  281-806-9718

Email:   jmurrah@ablemm.com

  • Buyers are fully responsible for removal of items plus all shipping and rigging charges.
  • Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
  • Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
  • Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
  • Contact and removal information will be emailed at the time invoices are issued.
Sales Contacts
Auction information
Renee Farris
315 Walt Whitman Road
Huntington Station
NY
11746
United States

 

+1 405 200 1050